Product description

• Specification

  Gemina magnetic shot plate blocks are machined from stainless steel and measure approximately 100mm in diameter and 35mm in thickness. Contains 1x neodymium magnets. Made in England, UK.

  ** The punch and shot plate pictured are sold separately.

• Additional Information

  If you have a solid and rigid work surface, you could use our Punch (Force) tool with a 2-4lb lump hammer.	If you need a pusher for your press, you can buy a flat or tapered pusher from our range of press tools.	If you need a spacer for your press, you can buy one here.

• Processing Times & Shipping

  PROCESSING TIMES

  All purchases are made to order and will take 4-5 working days to dispatch. You will receive a dispatch notification via email with your tracking number. All hardened items will take an extra 3-5 working days for the heat treatment process. These times may increase during promotions, sales and holiday periods.

  UK DELIVERY

  UK delivery is free on orders over £35. A delivery charge of £6 applies to orders under £35.

  INTERNATIONAL DELIVERY

  Free International Shipping on orders over £125GBP. Orders under £125GBP have flat rate shipping charge of £10-25 (depending on country) for all items in basket. We use UPS/DPD for all international deliveries. The buyer is solely responsible for understanding and complying with the import requirements of the destination country and any duty, VAT, taxes, or clearance charges that may be applicable outside of the UK.

  If you need to have your parcel delivered to a PO Box. Please contact us first.

  For more delivery information, please see our delivery policy.

  GPRS

  Gemina Ltd, 15 Somerset Road, East Preston, West Sussex BN161BZ, UK. www.gemina.co.uk
  Always use a punch and do not hammer directly onto the plate. To gain a good impression use a 2-4lb lump hammer and punch and use the block on a stump, anvil or on thin sheet of wood over a concrete floor. Wear appropriate Personal Protective Equipment (PPE), such as eye protection, face mask, arms covered, and leather apron. Regularly inspect steel tools and implements for wear and sharp edges. Keep steel tools dry and well oiled to prevent corrosion. If you use excessive tonnage with mild steel, you will dent the die (particularly with small designs). Press slowly and check progress. This should produce good results with most metals. Hardened Steel can be brittle and can shatter under extreme stress. When using a press remember to keep your work and spacers properly centred to the press ram at all times. Do not use to bridge gaps.
  Our EU Responsible Person for product safety compliance is EU Compliance Partner, located at Pärnu mnt. 139b – 14, 11317 Tallinn, Estonia. For any inquiries, please visit www.eucompliancepartner.com.