207 - Biohazard Shot Plate
This single design shot plate impression die creates the Biohazard symbol in silver, gold, pewter or copper. At approximately 9mm, this design is suited small pendants, ring signets or as an addition to a larger piece. For extra toxicity, check out our Radioactive Trefoil.
Take a look at our other shapes and symbols shot plates and dies.
Product description
- Specification
The Biohazard symbol measures approximately approximately:
Width: 9.5mm
Height: 9.5mm
Depth: 1mmThis shot plate is manufactured from mild steel and measures approximately 20mm thick and 40mm in diameter. Made in England, UK.
- Instructions
Can I use this tool with a hammer and a punch?
Yes - When using this tool with a hammer and punch, it's crucial to work over a solid and rigid surface such as a stump, anvil or a concrete floor. Without a solid surface, no amount of hammering will produce good results! The size of your hammer plays a big part too - a 4lb lump hammer is ideal. Do not use a hammer directly on the plate, always use a punch when hammering.
Can I use this shot plate with a hydraulic press?
Yes, all of our shot plates can be used in a press. Ensure your metal is annealed regularly.
How much silver shall I use with this design?
You can use approximately 1.5g of silver with this design.
What shape of silver should I use?
Round shot:
Melt your metal into round shot. Use a hammer and punch to force the silver into the die. Anneal after every 3 or 4 heavy blows.
Removing your impression from the die
Occasionally, some dies can 'hold on' to your metal. This is more common when using a press compared to hammering. Ensure the dies are clean before use. If you wish, you can apply a very small amount of oil into the die before forming as this can help removal. Excess metal will create a flange around the design that will aid in removal after hammering or pressing. Carefully use a thin bladed knife under the excess metal to lift the impression out of the die.
Some additional information can be found here shot plate and impression die tips.
- Additional Information
Take a look at our other shapes and symbols shot plates and impression dies.
If you have a solid and rigid work surface, you could use our Punch (Force) tool with a 2-4lb lump hammer. If you need a pusher for your press, you can buy a flat or tapered pusher from our range of press tools. If you need a spacer for your press, you can buy one here. - Processing Times & Shipping
PROCESSING TIMES
All purchases are made to order and will take 4-5 working days to dispatch. You will receive a dispatch notification via email with your tracking number. All hardened items will take an extra 3-5 working days for the heat treatment process. These times may increase during promotions, sales and holiday periods.
UK DELIVERY
UK delivery is free on orders over £30. A delivery charge of £6 applies to orders under £30.
INTERNATIONAL DELIVERY
Free International Shipping on orders over £125GBP. Orders under £125GBP have flat rate shipping charge of £10-25 (depending on country) for all items in basket. We use UPS/DPD for all international deliveries. The buyer is solely responsible for understanding and complying with the import requirements of the destination country and any duty, VAT, taxes, or clearance charges that may be applicable outside of the UK.
If you need to have your parcel delivered to a PO Box. Please contact us first.
For more delivery information, please see our delivery policy.
Reward points