Close

Shopping basket

Sub total

$0.00

(You'll pick your shipping method in the next step)

Proceed to checkout
or Continue Shopping
Free UK delivery over £30 | Free international delivery over £125

Tapered Hardened Pusher for Shot Plates & Impression Dies


Tapered Magnetic PusherClick the image to enlarge
PUSHER-TAPER

Tapered Hardened Pusher for Shot Plates & Impression Dies


This tapered pusher attaches to the universal magnetic base (not included) which in turn attaches to your press. Pushers act as a force when creating impressions with shot plates and impression dies.

The tapered profile and small face of this pusher allows for better visibility and alignment when pressing. The universal magnetic base keeps the pusher in place and it takes just a few seconds to install and remove.

There is also a full diameter version of this pusher for working with larger dies. Remember to position the universal magnetic base and pusher centrally on your press ram or frame before applying pressure. 

Please allow an extra 3-5 days for this option due to the hardening process.

Product description

  • Specification

    The tapered pusher is made from hardened tool steel and measures approximately:
    Diameter: 36mm
    Length:20mm

    Made in England, UK.

  • Instructions

    The tapered pusher attaches to the universal magnetic base (not included).

    Some hydraulic presses have a steel rod extending from the underneath of the jack - the universal base (not included) and pusher attaches to this rod. Other hydraulic presses have the ram extending from bottom to top. If your press is like that, attach the universal base and pusher to the underside of the press frame.

    The pusher face should be pointing down towards the die or shot plate. You can use the pusher in any type of press - hydraulic, kick press, fly press etc.

    Important! - Always ensure the pusher is placed centrally on the ram or frame before pressing.

  • Additional Information

    This is the tapered diameter pusher. You may also need the universal magnetic base (not included). For larger dies, you may prefer the flat faced pusher.

    Universal Magnetic BaseFlat Faced Pusher
    pushernew.jpgpusherflat.jpg


  • Shipping

    UK DELIVERY

    UK delivery is free on orders over £30. A delivery charge of £6 applies to orders under £30.

    INTERNATIONAL DELIVERY

    Free International Shipping on orders over £125GBP. Orders under £125GBP have flat rate shipping charge of £10-25 (depending on country) for all items in basket. We use UPS/DPD for all international deliveries. The buyer is solely responsible for understanding and complying with the import requirements of the destination country and any duty, VAT, taxes, or clearance charges that may be applicable outside of the UK. If you need to have your parcel delivered to a PO Box. Please contact us first.

    For more delivery information, please see our delivery policy.

$0.00
$40.61
Earn 13
Reward points

Add To Wishlist

Recommend this product to a friend

Tapered Hardened Pusher for Shot Plates & Impression Dies